Used for: Used for filling gaps between gypsum plasterboards, used for putting surfaces and cracks of plasterboard and plaster or other mineral materials and wood. Suited for sticking of gussets made of metal, paper or metallized paper.

Characteristics: White, elastic, has fibre reinforcement. Perfectly sticks with mineral construction materials and acrylic composites. Doesn’t consist solvents.

Preparing of surface: It must be clean and hard. Clean dust and fat. Absorptive surfaces undercoat with PRO undercoat.

Conditions: The surface must be dry and frost free. The temperature of the surface and environment should exceed +5°C. The temperature of surface and environment during drying should be between +20°C and +30°C.

How to use: Stir up putty before use. Spread putty with trowel on the surface or cracks. The layer of putty must be up to 15 mm thick. Drying time (weather temperature +20°C, humidity - 65%):  It is allowed to spread second layer in 3 ÷ 4 hours, became fully dry in 24 hours.

Outlet: ~0,3 kg /for 1 metre of joint. 2,1 kg/m²/mm.