Used for forming of decorative layer on ceilings and walls.
8.5kg
Used for: painting of different surfaces made of mineral construction materials (bricks stonework, plaster, gypsum plasterboard). Used for forming of decorative layer on ceilings and walls.
Technical data:
Thickness of filer: 0.2
Binder: copolymerized acrylic dispersion.
Quantity of non-volatile materials: >55 %.
Density: 1.7 kg per liter.
Diluent: water, usually not diluted.
Consumption: 0.7- 1.3 m²/l. Depends on surface and form of layer.
Method of painting: roller, brush.
Color: white, pastel shadings.
Shininess: mat.
Formation time: ~15 min.
Desiccation time: inadhesive in 1-2 hours, it is allowed to paint for the second time in 24 hours.
Exploitation: surface acquires solidity in 28 days.
Storage and shipment: keep in tight containers in the temperature above +5° C. Freezing is not allowed.
How to prepare surface for painting:The surface should be dry and clean. Remove peels of old paint and clean the surface. The adsorption of the surface must be as low as possible. The best results if painting color coincide with surface color and the surface is smooth.
Painting conditions: keep the temperature +5º above zero. New plaster paint after 14 days of drying. Avoid direct rays of sun and draught. It is recommended to wet the surface.
Painting:Prepare enough paint for painting. Stir up the paint carefully. Use roll or brush. The thickness of layer depends on conformation and pattern. In order to get a better results, use PRO undercoat and LATEX-PM or LIUKS paint after formation of decorative layer.
Tools cleaning: use water for tools cleaning.
Safety requirements: don’t spill the paint to canalization, ground or water pools. Protect your eyes and skin. If that occurred, wash with water and see a doctor. Keep out of reach of children.
